电冲机系列产品介绍 Series of products introduces Electic Punching Machine

电冲机是一种新的切割工具，它弥补了气割。等离子切割设备不易携带、切割时场地受限、切割成本高、设备投资大的不足。
本机主要用于切割厚度4mm以内的铁板、铜版、不锈钢板、铝合金板及非金属板等。广泛用于汽车修理、橱具设备、冷冻设备、家居装、铜字铜牌、钣金维修、打样补缺等行业，是维修、安装业的必备工具。
Electric punching machine is that one kind of new cutting implement, it have made up gas cutting. When plasma cutting equipment does not exchange carry-over, cutting space accepts the limit, cutting cost height, equipment invests in big deficiency. This machine is used for cutting thickness iron plate, copperplate, corrosion resistant plate, aluminium alloy board and metalloid board within 4mm etc. mainly. Broadly be used for that the automobile mends, industry such as closet utensil equipment, refrigeration facilities, home dress, copper character bronze medal, metal plate gold are maintained, make a proof filling a vacancy, is the implement keeping the job must prepare for in repair, assembling.




1. 电压（Rated Voltage）:220V-100V
2. 频率（Frequency）:50-60Hz
3. 输入功率（Rated Input Power）:625w
4. 空载转速（No-load speed）:1000r/min



本型号可切割4mm以下铁板、铜版、不锈钢板，铝合金板及非金属板。可切割各种内孔及小角度切割。切割处表面光滑无毛刺。
This type but cutting 4mm following iron plate, copperplate, corrosion resistant plate, aluminium alloy board and metalloid board. But various cutting inner hole and small angle cutting. Cutting place surface nothing glossy burr.




1. 电压（Rated Voltage）:220V-100V
2. 频率（Frequency）:50-60Hz
3. 输入功率（Rated Input Power）:625w
4. 空载转速（No-load speed）:1000r/min





本型号可以在4mm以下金属非金属板上切割各种形状，并可作多方向运动，切割处表面光滑无毛刺，刀具磨损后，可拆下重新磨削，继续切割效果不变。
This type can have pulled a long the various form of cutting in 4mm the following metal metalloids, may compose much direction sport and, cutting gets along after the glossy nothing burr, cutter wear away outside, removable the grinding, continuation cutting effect are down again invariable.